PLA SATIN is a PLA based material developed for its silky and smooth shine. It increases the perception of colour brilliance and disperses light when viewed from different angles giving a unique glossy effect. Slower printing and low temperature improve the silky effect. The satin surface creates beautiful reflection in printed objects.
PLA SATIN
PLA SATIN features:
- High light reflection
- Smooth and silky
- Fantastic Satin look
- Deep colours
| Size | ø tolerance | Roundness |
|---|---|---|
| 1,75mm | ø 0,05mm | 95% |
| 2,85mm | ø 0,10mm | 95% |
| Description | Testmethod | Typical value |
|---|---|---|
| Specific gravity | ISO 1183 | 1,24 g/cc |
| MFR 210°C/2,16 kg | ISO 1133 | 8,2 g/10 min |
| Tensile strength at yield | ISO 527 | 71 MPa |
| Tensile strength at break | ISO 527 | 71 MPa |
| Elongation strain at yield | ISO 527 | 3,2% |
| Elongation strain at break | ISO 527 | 3,6% |
| Tensile (E) modulus | ISO 527 | 3200 MPa |
| Impact strength charpy method 23°C | ISO 179 1eA | 2,6 kJ/m2 |
| Vicat softening temp. | ISO 306 B50 | 58,2°C |
| Description | Testmethod | Typical value |
|---|---|---|
| printing temp. | DF | 225±10˚C |
Colours:
PLA SATIN is available from stock in the following colours.
For non stock colours a minimum of 40kg ± 10% is required.
whs
sis
pis
pus
bus
grs
yfs
ras
gos
Packaging:
PLA SATIN is available in nearly any type of packaging and labelling. Ask our team to help you customizing your product.
Additional info:
Due to its low tendency to warp PLA SATIN can also be printed without a heated bed. If you have a heated bed the recommended temperature is ± 50-60˚C. PLA SATIN can be used on all common desktop FDM or FFF technology 3D printers.
Please note: the parameters you use for printing with Satin can change the Satin effect on printed parts. Looking into the parameters and fine-tune the profile for your printer will benefit the Satin effect of your printed part.
Storage:
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.